How to Wax Your Surfboard
Basecoat first, then the right top coat for the water temperature.
Waxing a surfboard is not complicated, but doing it properly makes a big difference. A good wax job gives your feet superior grip.
Start with a Good Basecoat
The basecoat is the foundation of the wax job. It helps build the small bumps and texture that your top coat sticks to. If you skip the basecoat, your wax may flatten out quicker, especially in warm or tropical conditions.
Use firm pressure and take your time. You are trying to build textured beads of wax.
Gecko Glue Basecoat goes on first. After that, add Warm or Tropical wax depending on the water temperature.
Basic Waxing Steps
1. Clean the Deck
Start with a clean deck if possible. Old, dirty waxes should be removed.
2. Apply Basecoat
Rub the basecoat over the full area until you build a firm, textured pattern. Normally wax should cover the whole surfboard up to the logo.
3. Add Top Coat
Use Gecko Glue Warm or Tropical wax over the basecoat, depending on the water temperature.
Watch How to Wax Your Board
These two videos show the basic idea. One is a longer YouTube video, showing applying tropical with no base coat and the other is a quick Gecko Glue basecoat and then tropical clip.
Surfboard Waxing Video
A simple look at waxing your surfboard properly, with enough grip under your feet before you paddle out.
Gecko Glue Basecoat Wax
A quick Gecko Glue clip showing the basecoat stage. This is the layer that helps the rest of the wax job hold together.
@swdreaming
Gecko Glue: Base Coat Surf Wax 🦎🙌🏼
#surfwax
#surfingthailand
#surfingphuket
#localsurfshop
#surfaholics
Which Gecko Glue Wax Should You Use?
- Basecoat: use first as the foundation layer.
- Tropical: best for 24°C+ / 75°F+ water.
- Warm: best for 20–24°C / 68–75°F water.
For places like Phuket, Bali and other tropical surf spots, most surfers will use Basecoat first, then Tropical wax on top.